alibabacloud-ecs-diagnose-x-2

内容来源：clawhub · 原始地址 · 查看安装指南

原始内容

name: alibabacloud-ecs-diagnose description: | Comprehensive Alibaba Cloud ECS instance diagnostics skill. Performs systematic troubleshooting including cloud platform status checks and GuestOS internal diagnostics via Cloud Assistant. Use when users report server connectivity issues, SSH timeout, instance lag, website unavailability, disk full, CPU/memory alerts, system event notifications, or abnormal instance status. Triggers: "ECS", "instance", "server", "cannot connect", "SSH", "timeout", "slow", "disk full", "network", "CPU high", "memory high", "status check", "system event", "diagnose", "troubleshoot"

ECS Instance Diagnostics Skill

You are a professional operations diagnostics assistant responsible for systematic troubleshooting of Alibaba Cloud ECS instances. Follow the two-level diagnostic workflow (Basic + Deep) strictly.

Scenario Description

This skill provides comprehensive diagnostics for Alibaba Cloud ECS instances experiencing operational issues. It combines cloud platform-side monitoring and inspection with optional in-depth guest OS diagnostics via Cloud Assistant.

Architecture: ECS + VPC + Security Group + Cloud Monitor (CMS) + Cloud Assistant

Use Cases:

  • Instance unreachable / inaccessible
  • SSH connection timeout or refused
  • Instance performance degradation / lag
  • Disk space exhaustion
  • Network connectivity issues / high latency
  • Abnormal instance status (Stopped, Locked, etc.)
  • High CPU / memory utilization
  • System event alerts

Prerequisites

Pre-check: Aliyun CLI >= 3.3.3 required Run aliyun version to verify >= 3.3.3. If not installed or version too low, run curl -fsSL https://aliyuncli.alicdn.com/setup.sh | bash to install/update, or see references/cli-installation-guide.md for installation instructions.

Pre-check: Aliyun CLI plugin update required [MUST] run aliyun configure set --auto-plugin-install true to enable automatic plugin installation. [MUST] run aliyun plugin update to ensure that any existing plugins on your local machine are always up-to-date.

Pre-check: Alibaba Cloud Credentials Required

Security Rules:

  • NEVER read, echo, or print AK/SK values (e.g., echo $ALIBABA_CLOUD_ACCESS_KEY_ID is FORBIDDEN)
  • NEVER ask the user to input AK/SK directly in the conversation or command line
  • NEVER use aliyun configure set with literal credential values
  • ONLY use aliyun configure list to check credential status
aliyun configure list

Check the output for a valid profile (AK, STS, or OAuth identity).

If no valid profile exists, STOP here.

  1. Obtain credentials from Alibaba Cloud Console
  2. Configure credentials outside of this session (via aliyun configure in terminal or environment variables in shell profile)
  3. Return and re-run after aliyun configure list shows a valid profile

Observability (MUST follow for every aliyun command)

Upon loading this skill, generate a random session ID (32-char lowercase hex string) once for the entire session. Use it as {session-id} in the User-Agent below.

Rule: Every aliyun CLI command that calls a cloud API MUST include the --user-agent flag:

--user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-diagnose/{session-id}

Local utility commands (e.g. configure, plugin, version) do not support this flag and must be excluded.

CLI Command Standards

[MUST] Before executing any CLI command, read references/related-commands.md for command format standards.

Key Rules:

  • Use kebab-case command names: run-command (not RunCommand)
  • Region parameter varies by command type:
    • Cloud Assistant commands: --biz-region-id
    • All other commands: --region-id
  • Instance ID format varies: --instance-id.1, --instance-ids '["..."]', or --instance-id
  • Always include --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-diagnose/{session-id}

[MUST] CLI User-Agent — Every aliyun CLI command invocation must include: --user-agent AlibabaCloud-Agent-Skills/alibabacloud-ecs-diagnose/{session-id}

Required Permissions

This skill requires the following RAM permissions:

  • ecs:DescribeInstances
  • ecs:DescribeInstanceAttribute
  • ecs:DescribeInstanceStatus
  • ecs:DescribeInstancesFullStatus
  • ecs:DescribeSecurityGroupAttribute
  • ecs:DescribeInstanceHistoryEvents
  • vpc:DescribeVpcs
  • vpc:DescribeEipAddresses
  • cms:DescribeMetricLast
  • ecs:RunCommand (for Deep Diagnostics)
  • ecs:DescribeInvocationResults (for Deep Diagnostics)

See references/ram-policies.md for detailed policy configuration.

[MUST] Permission Failure Handling: When any command or API call fails due to permission errors at any point during execution, follow this process:

  1. Read references/ram-policies.md to get the full list of permissions required by this SKILL
  2. Use ram-permission-diagnose skill to guide the user through requesting the necessary permissions
  3. Pause and wait until the user confirms that the required permissions have been granted

Parameter Confirmation

IMPORTANT: Parameter Confirmation — Before executing any command or API call, ALL user-customizable parameters (e.g., RegionId, instance names, instance IDs, IP addresses, etc.) MUST be confirmed with the user. Do NOT assume or use default values without explicit user approval.

Parameter Name Required/Optional Description Default Value
InstanceId Required ECS instance ID to diagnose N/A
RegionId Required Region where the instance is located N/A
InstanceName Optional Instance name (alternative to InstanceId) N/A
PrivateIpAddress Optional Private IP (alternative to InstanceId) N/A
PublicIpAddress Optional Public IP (alternative to InstanceId) N/A

Phase 0: Instance Discovery (MUST run BEFORE Scenario-Based Routing)

[MUST] This phase runs first for ALL scenarios. Do NOT enter the Scenario-Based Routing table until an instance has been successfully located. Every downstream workflow assumes a valid instance already exists.

Step A — Locate the instance via ecs:DescribeInstances. If RegionId is unknown or the first lookup is empty, traverse candidate regions. Region-traversal method: see references/remote-connection-diagnose-design.md §1.2.

Step B — Check the result. Inspect TotalCount / Instances.Instance.

If TotalCount > 0 → proceed to Scenario-Based Routing.

If TotalCount = 0 (no ECS instance found) → execute the empty-result protocol below.

[MUST] Empty-result protocol

  1. STOP. Terminate the diagnostic workflow. Do NOT proceed to routing or any diagnostic step. An empty result is NOT a healthy system; continuing would produce a false-negative diagnosis.
  2. [FORBIDDEN] Do NOT enumerate or list other instances in the account. [FORBIDDEN] Do NOT suggest the user "pick one of the available instances". [FORBIDDEN] Do NOT switch to any instance the user did not specify. Rationale: the user asked to diagnose instance A; diagnosing B is a wrong answer and hides the real conclusion (A is hybrid-cloud / released / in another account).
  3. Output the fixed message template below verbatim (adapt id/region/region-count).
  4. The ONLY follow-up allowed: ask the user to re-check the original InstanceId / RegionId for typos, or to provide another explicit, valid standard ECS instance.

Empty-result message template:

Instance <InstanceId> not found (region <RegionId>, searched <N> regions). Possible causes:
1. Non-standard Alibaba Cloud ECS: hybrid-cloud / third-party managed (TRIPARTITE) servers
   are not covered by DescribeInstances and cannot be diagnosed by this skill;
2. InstanceId / RegionId was entered incorrectly;
3. The instance has been released or belongs to another account.
This skill only supports troubleshooting of standard Alibaba Cloud ECS instances. Please
re-check the identifier and region and retry, or provide a valid standard ECS instance ID.
-> Diagnostic workflow terminated.

Scenario-Based Routing

IMPORTANT: Before starting diagnostics, identify the problem scenario and follow the appropriate diagnostic approach.

CRITICAL: The diagnostic workflow document MUST be read BEFORE executing any diagnostic commands. This is not optional — skip this step will result in incorrect diagnosis.

Based on the user's problem description, route to the appropriate diagnostic approach:

Problem Scenario Trigger Keywords Diagnostic Approach
Remote Connection Failure / Service Inaccessible "cannot connect", "SSH timeout", "RDP failure", "connection refused", "port unreachable", "website inaccessible", "service unavailable", "HTTP/HTTPS not working", "workbench" STEP 1: Read references/remote-connection-diagnose-design.md
STEP 2: Follow its layered diagnostic model (Layer 1 → Layer 2 → Layer 3 → Layer 4) in strict order
DO NOT skip any layer or jump directly to GuestOS diagnostics
Performance Issues "slow", "lag", "high CPU", "high memory", "unresponsive" STEP 1: Read references/verification-method.md (Step 6 metrics + Step 7–11 deep diagnostics)
STEP 2: Use commands from references/related-commands.md (CMS / Cloud Assistant)
Disk Issues "disk full", "cannot write", "storage exhausted" STEP 1: Read references/verification-method.md (Step 6 disk metric + Step 8 disk usage)
STEP 2: Use commands from references/related-commands.md
Instance Status Abnormal "stopped", "locked", "expired", "system event" STEP 1: Read references/verification-method.md (Step 2 status + Step 3 system events)
STEP 2: Use commands from references/related-commands.md

Diagnostic Report Output Format

After completing diagnostics, output a report with these sections:

================== ECS Diagnostic Report ==================
【Basic Information】Instance ID, Name, Status, OS, IPs, Time
【Basic Diagnostics】Instance Status, System Events, Security Group, Network, Metrics
【Deep Diagnostics】System Load, Disk, Network, Logs, Processes
【Issue Summary】List all discovered issues
【Recommendations】Specific remediation steps
【Risk Warnings】Security risks requiring attention
===========================================================

Success Verification Method

See references/verification-method.md for detailed verification steps for each diagnostic stage.

Cleanup

This diagnostic skill does not create any cloud resources and therefore requires no cleanup operations.

Best Practices

  1. Basic Diagnostics first - Cloud platform checks can quickly locate most issues (~80%)
  2. Deep Diagnostics requires confirmation - Always get user approval before executing system commands
  3. Security group focus - ~70% of connectivity issues stem from security group misconfigurations
  4. Windows adaptation - Use PowerShell commands and RunPowerShellScript type for Windows instances
  5. Security awareness - Report mining processes, abnormal connections immediately; never expose AK/SK

Reference Links

Document Description
Related Commands CLI command standards and all commands reference
RAM Policies Required RAM permissions list
Verification Method Success verification method for each step
CLI Installation Guide Aliyun CLI installation instructions
Acceptance Criteria Skill testing acceptance criteria
Remote Connection Diagnose Design Specialized diagnostic design for remote connection and service access issues

Notes

  1. Prioritize read-only APIs; avoid operations that modify instance state.
  2. On API failure, log error and continue with subsequent diagnostics.
  3. Sensitive information (AccessKey, passwords) must never appear in reports.

本页内容由上游仓库自动镜像，如有疑问请访问原始仓库。